TB-10 ~ NL502SC
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 23.62 (600)/17.71 (450) |
| Max. machining diameter | inch (mm) | 19.68 (500) | |
| Max. machining length | inch (mm) | 19.68 (500) | |
| Dia. of through spindle hole | inch (mm) | 1.96 (50) | |
| TRAVEL | X-axis | inch (mm) | 11.61 (295) |
| Z-axis | inch (mm) | 23.62 (600) | |
| SPINDLE | Output power | kw | 15.5/18.5 |
| The form of spindle end | A2-6 | ||
| Max. spindle speed | rpm | 3000 | |
| Chuck | inch | 10 plain back | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 3.93 (100)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed X-axis_ | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed Z-axis_ | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) -314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | 0.5 | ||
| Size of lathe tool | inch (mm) | 1 (25.4) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 1.50 (38.1) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0005 (0.014) | |
| Repeatability X-axis_ | inch (mm) | 0.0002 (0.006) | |
| Repeatability Z-axis_ | inch (mm) | 0.0002 (0.007) | |
| OTHERS | Power capacity | kV A | 25 |
| Cooling tank capacity | Gal (L) | 63.40 (240) | |
| Dimension(length _width _height_ | inch (mm) | 167.32 _ 74.02 _ 76.77 (4250_1880_1950) | |
| Net weight | lbs (kg) | 8,818 (4000) |
TB-10Z ~ NL504SC
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 23.62 (600)/17.71 (450) |
| Max. machining diameter | inch (mm) | 19.68 (500) | |
| Max. machining length | inch (mm) | 39.37 (1000) | |
| Dia. of through spindle hole | inch (mm) | 1.96 (50) | |
| TRAVEL | X-axis | inch (mm) | 11.61 (295) |
| Z-axis | inch (mm) | 43.30 (1100) | |
| SPINDLE | Output power | kw | 15/18.5 |
| The form of spindle end | A2-6 | ||
| Max. spindle speed | rpm | 3000 | |
| Chuck | inch | 10” plain back | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 3.93 (100)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed（X-axis） | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed（Z-axis） | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | Second/Station | 0.5 | |
| Size of lathe tool | inch (mm) | 1 (25.4) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 1.50 (38.1) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0006 (0.016) | |
| Repeatability （X-axis） | inch (mm) | 0.0002 (0.006) | |
| Repeatability
(Z-axis） |
inch (mm) | 0.0003 (0.008) | |
| OTHERS | Power capacity | kV A | 25 |
| Cooling tank capacity | Gal (L) | 79.25 (300) | |
| Dimension (length ×width ×height） | inch (mm) | 187.01 x 74.02 x 76.77 (4750×1880×1950) | |
| Net weight | lbs (kg) | 9,921 (4500) |
TB-10ZX ~ NL503H
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed | inch (mm) | 25.59 (650) |
| Max. swing over saddle | inch (mm) | 18.89 (480) | |
| Max. machining length | inch (mm) | 19.68 (500) | |
| Dia. of through spindle hole | inch (mm) | 2.95 (75) | |
| TRAVEL | X-axis | inch (mm) | 11.41 (290) |
| Z-axis | inch (mm) | 33.46 (850) | |
| SPINDLE | Output power | kw | 18.5/22 |
| The form of spindle end | A2-8 | ||
| Max. spindle speed | rpm | 1500 | |
| Chuck | inch | 12” plain back | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 5.11 (130)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed（X-axis） | inch/min (m/min) | 0.62 (16) |
| Rapid feed speed（Z-axis） | inch/min (m/min) | 0.62 (16) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 12 |
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0004 (0.012) | |
| Repeatability（X-axis） | inch (mm) | 0.0002 (0.006) | |
| Repeatability（Z-axis） | inch (mm) | 0.0002 (0.006) | |
| OTHERS | Power capacity | kV A | 35 |
| Cooling tank capacity | Gal (L) | 95.10 (360) | |
| Dimension(length ×width ×height） | inch (mm) | 78.23 x 114.17 x 44.45 (3850x1950x2120) | |
| Net weight | lbs (kg) | 19,842 (9000) |
TB-12 ~ NL634SC
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 24.80 (630)/17.71 (450) |
| Max. machining diameter | inch (mm) | 24.80 (630) | |
| Max. machining length | inch (mm) | 39.37 (1000) | |
| Dia. of through spindle hole | inch (mm) | 2.75 (70) | |
| TRAVEL | X-axis | inch (mm) | 13.97 (355) |
| Z-axis | inch (mm) | 43.30 (1100) | |
| SPINDLE | Output power | kw | 18.5/22 |
| The form of spindle end | A2-8 | ||
| Max. spindle speed | rpm | 2000 | |
| Chuck | inch | 12 plain back | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 5.11 (130)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed（X-axis） | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed（Z-axis） | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | Second/Station | 0.5 | |
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0006 (0.016) | |
| Repeatability（X-axis） | inch (mm) | 0.0002 (0.006) | |
| Repeatability（Z-axis） | inch (mm) | 0.0003 (0.008) | |
| OTHERS | Power capacity | kV A | 35 |
| Cooling tank capacity | Gal (L) | 79.25 (300) | |
| Dimension(length ×width ×height） | inch (mm) | 157.48 x 75.98 x 81.69 (4000×1930×2075) | |
| Net weight | lbs (kg) | 16,535 (7500) |
TB-12Z ~ NL635SC
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 24.80 (630)/ 17.71 (450) |
| Max. machining diameter | inch (mm) | 24.80 (630) | |
| Max. machining length | inch (mm) | 59.05 (1500) | |
| Dia. of through spindle hole | inch (mm) | 2.75 (70) | |
| TRAVEL | X-axis | inch (mm) | 13.97 (355) |
| Z-axis | inch (mm) | 62.99 (1600) | |
| SPINDLE | Output power | kw | 18.5/22 |
| The form of spindle end | A2-8 | ||
| Max. spindle speed | rpm | 2000 | |
| Chuck | inch | _12 plain back | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 5.11 (130)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed_X-axis_ | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed_Z-axis_ | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | 0.5 | ||
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0007 (0.018) | |
| Repeatability_X-axis_ | inch (mm) | 0.0002 (0.006) | |
| Repeatability_Z-axis_ | inch (mm) | 0.0003 (0.009) | |
| OTHERS | Power capacity | kV A | 35 |
| Cooling tank capacity | Gal (L) | 97.74 (370) | |
| Dimension(length _width _height_ | inch (mm) | 178.74 x 77.76 x 84.45 (4540_1975_2145) | |
| Net weight | lbs (kg) | 17,637 (8000) |
TB-15 ~ NL634SCZ
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 24.80 (630)/ 17.71 (450) |
| Max. machining diameter | inch (mm) | 24.80 (630) | |
| Max. machining length | inch (mm) | 37.79 (960) | |
| Dia. of through spindle hole | inch (mm) | 3.54 (90) | |
| TRAVEL | X-axis | inch (mm) | 13.97 (355) |
| Z-axis | inch (mm) | 43.30 (1100) | |
| SPINDLE | Output power | kw | 18.5/22 |
| The form of spindle end | A2-11 | ||
| Max. spindle speed | rpm | 1000 | |
| Chuck | inch | 15 | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 5.11 (130)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed_X-axis_ | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed_Z-axis_ | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | 0.5 | ||
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0006 (0.016) | |
| Repeatability_X-axis_ | inch (mm) | 0.0002 (0.006) | |
| Repeatability_Z-axis_ | inch (mm) | 0.0003 (0.008) | |
| OTHERS | Power capacity | kV A | 35 |
| Cooling tank capacity | Gal (L) | 79.25 (300) | |
| Dimension(length _width _height_ | inch (mm) | 157.48 x 75.98 x 81.69 (4000_1930_2075) | |
| Net weight | lbs (kg) | 16,755 (7600) |
TB-15Z ~ NL635SCZ
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 24.80 (630)/ 17.71 (450) |
| Max. machining diameter | inch (mm) | 24.80 (630) | |
| Max. machining length | inch (mm) | 57.48 (1460) | |
| Dia. of through spindle hole | inch (mm) | 3.54 (90) | |
| TRAVEL | X-axis | inch (mm) | 13.97 (355) |
| Z-axis | inch (mm) | 62.99 (1600) | |
| SPINDLE | Output power | kw | 18.5/22 |
| The form of spindle end | A2-11 | ||
| Max. spindle speed | rpm | 1000 | |
| Chuck | inch | 15 | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 5.11 (130)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed_X-axis_ | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed_Z-axis_ | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | 0.5 | ||
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0007 (0.018) | |
| Repeatability_X-axis_ | inch (mm) | 0.0002 (0.006) | |
| Repeatability_Z-axis_ | inch (mm) | 0.0003 (0.009) | |
| OTHERS | Power capacity | kV A | 35 |
| Cooling tank capacity | Gal (L) | 97.74 (370) | |
| Dimension(length _width _height_ | inch (mm) | 178.74 x 77.76 x 84.45 (4540_1975_2145) | |
| Net weight | lbs (kg) | 17,857 (8100) |
TB-18 ~ NL634SCZ
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 28.34 (720)/20.86 (530) |
| Max. machining diameter | inch (mm) | 24.80 (630) | |
| Max. machining length | inch (mm) | 59.05 (1500) | |
| Dia. of through spindle hole | inch (mm) | 3.34 (85) | |
| TRAVEL | X-axis | inch (mm) | 13.97 (355) |
| Z-axis | inch (mm) | 62.99 (1600) | |
| SPINDLE | Output power | kw | 22/30 |
| The form of spindle end | A2-11 | ||
| Max. spindle speed | rpm | 2000 | |
| Chuck | inch | 18 | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 6.29 (160)/7.08 (180) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed（X-axis） | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed（Z-axis） | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 12 |
| Tool indexing time | 0.5 | ||
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0006 (0.016) | |
| Repeatability（X-axis） | inch (mm) | 0.0002 (0.006) | |
| Repeatability（Z-axis） | inch (mm) | 0.0003 (0.008) | |
| OTHERS | Power capacity | kV A | 40 |
| Cooling tank capacity | Gal (L) | 105.66 (400) | |
| Dimension(length ×width ×height） | inch (mm) | 157.48 x 75.98 x 81.69 (4000x1930x2075) | |
| Net weight | lbs (kg) | 28,660 (13,000) |
TB-18Z ~ NL635SCZ
| ITEM | UNIT | PARAMETERS | |
| MACHINING RANGES | Max. swing over bed/ saddle | inch (mm) | 24.80 (630)/ 17.71 (450) |
| Max. machining diameter | inch (mm) | 24.80 (630) | |
| Max. machining length | inch (mm) | 57.48 (1460) | |
| Dia. of through spindle hole | inch (mm) | 3.54 (90) | |
| TRAVEL | X-axis | inch (mm) | 13.97 (355) |
| Z-axis | inch (mm) | 62.99 (1600) | |
| SPINDLE | Output power | kw | 18.5/22 |
| The form of spindle end | A2-11 | ||
| Max. spindle speed | rpm | 1000 | |
| Chuck | inch | 18 | |
| TAIL STOCK | Dia./travel of the sleeve | inch (mm) | 5.11 (130)/3.93 (100) |
| Mandrel taper hole | Morse 5# | ||
| FEED & SPEED | Rapid feed speed（X-axis） | inch/min (m/min) | 314.96 (8) |
| Rapid feed speed（Z-axis） | inch/min (m/min) | 472.44 (12) | |
| Cutting feed rate | inch/min (mm/min) | 0.03 (1) – 314.96 (8000) | |
| TURRET | No. of tool stations | Station | 8 |
| Tool indexing time | 0.5 | ||
| Size of lathe tool | inch (mm) | 1.25 (31.75) x 1 (25.4) | |
| Max. diameter of boring bar | inch (mm) | 2 (50.8) | |
| ACCURACY | Positioning accuracy (X-axis) | inch (mm) | 0.0004 (0.012) |
| Positioning accuracy (Z-axis) | inch (mm) | 0.0007 (0.018) | |
| Repeatability（X-axis） | inch (mm) | 0.0002 (0.006) | |
| Repeatability（Z-axis） | inch (mm) | 0.0003 (0.009) | |
| OTHERS | Power capacity | kV A | 35 |
| Cooling tank capacity | Gal (L) | 97.74 (370) | |
| Dimension(length ×width ×height） | inch (mm) | 178.74 x 77.76 x 84.45 (4540×1975×2145) | |
| Net weight | lbs (kg) | 17,857 (8100) |